ببینید مشتریان درباره ما چه می‌گویند.

Το χρησιμοποιούμε εδώ και λίγο καιρό στο εργαστήριό μας και μέχρι στιγμής μας έχει βολέψει αρκετά. Κάνουμε κυρίως κοπές και σχέδια σε ξύλο, ανάλογα με την παραγγελία. Μου άρεσε ιδιαίτερα το ότι μετά τις αρχικές ρυθμίσεις η καθημερινή χρήση είναι σχετικά απλή. Τα αποτελέσματα στις λεπτομέρειες είναι επίσης καλά και δεν χρειάζεται να κάνουμε πολλές διορθώσεις μετά την κατεργασία. Για τη δουλειά που κάνουμε, είναι ένα μηχάνημα που μας έχει λύσει αρκετά τα χέρια.

We bought this CNC router mainly for detailed wood carving and relief work. This decorative panel was one of the projects we made with the machine, and we were impressed with how well it handled the small details and deeper carving areas. The finished relief came out clean and well defined. For our workshop, the machine has been a useful solution for both decorative pieces and custom woodworking projects.

The CNC Router machine is running well and we are very satisfied with its performance so far. It has been working smoothly for our daily woodworking jobs, and the operation is easier than we expected after getting familiar with the machine. We would also like to thank Daisy for her help and patience throughout the whole process. She has been very helpful whenever we had questions and made the communication much easier for us. We really appreciate all her support.

We bought this 3040 CNC router mainly because we needed something compact for smaller machining jobs, but we also wanted to be able to work with materials like aluminium without filling the workshop with dust and chips. The integrated water tank has been quite useful for that. We’ve used it for small aluminium parts, engraving and some wooden pieces.

We bought the 3040 mainly for smaller jobs and prototyping, so we didn’t want to take up half the workshop with a full-size CNC. It sits nicely on the bench and is easy enough to move around when we need the space for something else.

We’ve been using it for timber, acrylic and some light aluminium work. Most of what we do is custom pieces and small batches, so being able to make a part in-house instead of sending it out has been really useful.

There was a bit of trial and error at the start with feeds, speeds and different cutters, but that’s part of getting used to any CNC. Once we found the settings that work for our materials, we’ve been getting good results. It’s a handy little machine for our workshop and has already paid for itself in the time we’ve saved on small jobs.

Llevamos un tiempo trabajando con esta CNC de sobremesa y, para nuestro tipo de trabajo, nos está funcionando muy bien. La utilizamos sobre todo para grabados, piezas pequeñas de madera y algunos trabajos personalizados en MDF y metacrilato.

Lo que más nos gustó fue el tamaño. No tenemos un taller muy grande y necesitábamos una máquina que pudiéramos tener siempre a mano sin ocupar el espacio de una CNC industrial. Para trabajos pequeños y pedidos personalizados resulta bastante cómoda.

We’ve had the router in our workshop for some time now and use it for different woodworking jobs, depending on the order. Some days it’s cabinet components, other days it’s custom furniture parts, so we needed a machine that could handle a bit of variety. The first few days were mostly about getting the settings right for our materials and figuring out the best way to organize the jobs. Once we got through that stage, the machine became much easier to work with. We’ve been getting consistent results and don’t need to spend as much time on manual finishing and preparation. We’ve also had good communication with the team when we needed help. They were responsive when we had questions, which made the installation and initial setup less stressful. So far, we’re happy with how the machine has fitted into our everyday work.

What we like is that we can move from cutting to drilling or other operations without stopping to change tools all the time. This is especially helpful when we have several similar orders to finish. The machine also handles the larger sheets we normally use without a problem.

We’ve had a few questions along the way, especially when setting up some of the programs, and the support team was available to help us. For our workshop in Colombia, it has been a useful upgrade and has made some of our regular production jobs much easier to manage.

We’ve had the CNC router in our shop for a while now and have been using it mostly for plywood, MDF and cabinet parts. It’s been a good fit for the kind of work we do. The vacuum table is probably the feature we use the most. It holds the sheets in place well and makes things easier when we’re working on larger pieces. We also found the automatic tool setting quite handy once we got everything set up.

We have been using this 4-head CNC router in our workshop in Peru for quite a while. It has been a good machine for the type of woodworking jobs we do, especially when we need to make several similar pieces. The four spindles save us quite a bit of time compared with doing everything one by one. Recently we contacted CATEK again because we needed some parts for the machine. They helped us confirm the parts we needed and arrange the order. It is good to see that they still provide support after the machine has been in use for some time. So far, we are happy with both the machine and the service.

The CNC router machine has arrived and we have just finished the installation in our workshop in Ecuador. We haven’t started regular production yet, but the machine looks very solid and well built. We chose this model mainly because of the automatic tool changer and rotary axis, as we want to use it for different woodworking projects and furniture parts. The installation process went smoothly, and the CATEKCNC team has been helping us with the setup and answering our questions. So far, everything looks good and we are looking forward to starting production and testing the machine with our actual projects.

We’ve been using the Spire 1325 with flood cooling for aluminum work, and so far it has been working really well for us. One thing we’ve found useful is using alcohol as the lubricant when cutting aluminum. It keeps the cutting area cleaner and helps with chip evacuation, especially when we’re running smaller tools and doing finer work. We’ve seen similar setups on higher-end machines, so it was something we wanted to try on our own CNC as well. The flood cooling setup on this machine makes it much easier to manage the cutting process, and the machine itself feels solid and stable during aluminum jobs. We’re still trying different tools, feeds and speeds to find the best combination, but overall we’re very happy with how the machine handles aluminum.